![background image](http://html1.mh-extra.com/html/yardworks/060-0608-2/060-0608-2_operators-manual_4659751062.webp)
model no.
060-0608-2
| contact us: 1.866.523.5218
62
MAINT
eNANC
e
4. Carefully remove the M8 hex bolt (B)
on the left side which secures the
hex shaft and chain gear shaft to the
snowblower frame. Use a 22 mm or
adjustable wrench (C) to hold the
center of the hex shaft and use a 13
mm socket to remove the bolt on the
left side. (Fig. 67)
5. Slide out the hex shaft. Punch the shaft
out from the left side. Make sure all
pieces shown are accounted (only the
shaft is removed, the chain sprocket
wheel will remain on the chain).
(Fig. 68)
C
b
Figure 67
Figure 68
6. Remove the friction disc. (Fig. 69)
Figure 69