model no.
060-0608-2
| contact us: 1.866.523.5218
model no.
060-0608-2
| contact us: 1.866.523.5218
53
MAINT
eNANC
e
ADJUST CHUTe DefleCTOR TeNSION
–
10 mm wrench
–
13 mm wrench
1. Locate M8 lock nut (A) under the panel on the pivot of the chute deflector lever.
2. Locate the head of the M8 bolt (B) on the right side of the lever for the M8 lock nut.
(Fig. 49)
b
A
Figure 49
3. To increase deflector tension to prevent unwanted deflector movement from heavy
snow, use a 10 mm wrench on the head of the bolt and a 13 mm wrench to tighten the
M8 lock nut.
4. To decrease deflector tension to make deflector move easier, use a 10 mm wrench on
the head of the bolt and use a 13 mm wrench to loosen the M8 lock nut.