model no.
060-0608-2
| contact us: 1.866.523.5218
22
A
SS
eM
bl
y
CHUTe CAble
Locate the thick chute cable (A) zip tied
to the lower handle and connect under
the panel. Make sure this cable is routed
underneath the lower handle as shown
before assembly to the control panel.
Align center, insert, then tighten cap (B)
clockwise until snug. (Fig. 7)
b
A
Figure 7
DISCHARGe CHUTe DefleCTOR
CAble
Locate the coiled chute deflector cable
(A) and uncoil. Open the chute deflector
completely by hand then install the
cylindrical end (B) of the cable as
shown, ensuring that the chute deflector
adjustment handle is at the last or highest
position, and then press the chute deflector
to hang the cable threaded head into the
hole by placing the nut on the top side
shown by the arrow (C), then adjust the
bottom nut (D) into position to tighten the
cable. (Fig. 8)
A
b
D
C
Figure 8
