![background image](http://html1.mh-extra.com/html/yardworks/060-0608-2/060-0608-2_operators-manual_4659751046.webp)
model no.
060-0608-2
| contact us: 1.866.523.5218
46
MAINT
eNANC
e
RePlACING SHeAR PINS
1. The augers are secured to the spiral shaft with shear pins and clips. If the auger should
strike a foreign object or ice jam, the snowblower is designed so that the pins shear.
(Fig. 35)
Figure 35
2. If the augers will not turn, check to see if the pins have sheared. Replacement shear
pins and clips are found on the control panel and the manual bag. (Fig. 36)
Figure 36
3. Tap out broken shear pin with a hammer and punch or M6 bolt.
4. Apply anti seize lubricant to replacement shear pin to prevent corrosion and to make
pin easy to remove in future.
5. Install replacement shear pin through hole in auger and hole in auger shaft.
6. Install clip through hole at end of shear pin.