106078 L-03
Instructions
CAB FOR WALK-BEHIND SNOWBLOWERS #700525-2
INSTALLATION
PRE INSTALLATION:
NOTE
: Some standard pre assembly has been done (the most commonly used) to facilitate installation. Certain
models of walk behind snowblowers have accessories attached on the handle bar that come into interference
with the cab’s right adjustable support assembly.
Please follow the instructions that are in the hardware bag. Refer to the parts breakdown for identification of the
parts.
Determine the location of the left and right adjustable support assemblies that will adapt the best on your
snowblower. Several possibilities are offered, they are not all illustrated.
About twelve positions are possible and are adjustable in different ways. The link can be inverted which will allow
even more positions.
The right & left adjustable supports can be moved from one side to the other, the inside and outside attaching
plates can be inverted on either the vertical and horizontal handles, which will give a greater quantity of
positions.
The inside and outside attaching plates were designed to accept different sizes of snowblower handles.
Determine the installation that is necessary for your snowblower. Position the carriage bolts as close as possible
to the handles of the snowblower.
