Form No. MSC09482 Rev C
Caster and Dolly Kit
Part No. MSC01141
Part No. MSC09215
Part No. MSC09216
Part No. MSC09235
Part No. MSC09249
Installation Instructions
For Straight-Blade and
HTX/Sport Plows
Model MSC09215 and MSC09249
1.
Assemble the casters as shown in
g038527
Figure 1
1.
Nut (5/16 inch)
6.
Nut (3/8 inch)
2.
Washers
7.
Large caster
3.
Small caster shoe base
8.
Small caster
4.
Kickstand caster base
9.
Bolt (5/16 inch)
5.
Carriage bolt
2.
Park the machine on a level surface, raise the
plow fully, and place 2 safety jack stands under
the plow cutting edge.
3.
Shut off the engine, wait for all moving parts to
stop, engage the parking brake, and remove
the key.
4.
Slide the small caster shoes into the shoe
holders on the plow and secure them with a
quick pin (
).
Note:
Adjust the number of washers above and
below the shoe holder as needed.
g038528
Figure 2
1.
Quick pin
3.
Small caster shoe
2.
Shoe holder
4.
Washers
5.
Remove the existing kickstand and replace it
with the kickstand caster shoe (
g038529
Figure 3
1.
Kickstand spring pin
2.
Kickstand caster shoe
© 2019—BOSS Products
P.O. Box 787
Iron Mountain, MI 49801
Register at www.bossplow.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*MSC09482* C
