model no.
060-0608-2
| contact us: 1.866.523.5218
model no.
060-0608-2
| contact us: 1.866.523.5218
41
CONTRO
lS
6. Disengage self-drive control lever (A), then pull both triggers to make a tight 180º turn
or push back to the garage.
A
C
b
Figure 29
ClUTCH lOCK feATURe
This snowblower offers a clutch lock feature that will enable the operator to keep the
snowblower moving forward while you adjust the chute. To use the clutch lock system,
follow the following steps.
–
While both the drive and auger control levers are fully depressed, release the auger
control lever (A) while keeping the self-drive control lever (B) fully depressed. The
clutch lock feature will automatically keep the auger control lever engaged as long as
the self-drive control lever is depressed. (Fig. 30)
WARNING: If snow clogs the discharge chute do not try to remove it before:
–
Releasing the auger control handle.
–
Stopping the engine.
–
Disconnecting the cable from the spark plug.
Do not put your hand inside the chute or auger. Use the chute clearing tool
included with your snowblower.
