MAINTENANCE
12/05
ZT370 Operation Manual
47
Perform the following maintenance every
year of operation.
•
Retorqueing the gimbal ring to
steering shaft connection
•
Inspecting the bellows and the
clamps
• Checking the engine alignment
• Lubricating the steering shaft
bushing
•
Lubricating the unit bearing (gimbal
housing)
•
Lubricating the engine coupler
•
Checking the circuit for loose or
damaged connections
•
Testing the Y-CaPS unit output
•
Checking the steering system for
loose, missing or damaged parts
•
Checking the remote control for
loose, missing or damaged parts
•
Lubricating the cable and the
linkages
•
Touching-up the stern-drive paint and
spray with corrosion guard
•
Changing the stern-drive oil
•
Retorqueing the rear engine mounts
•
Replace of friction disc (Light duty
commercial applications only)
■
Retorqueing the gimbal ring to
steering shaft connection
See Retorqueing the gimbal ring to
steering shaft connection on page 38
■
Inspecting the bellows and the
clamps
See General Inspection on page 34
.
■
Checking the engine alignment
See Checking the engine alignment on
page 38
■
Lubricating the steering shaft
bushing
See Lubricating the steering shaft bushing
on page 38
.
■
Lubricating the unit bearing
(gimbal housing)
See Lubricating the unit bearing (gimbal
housing) on page 38
.
■
Lubricating the engine coupler
See Lubricating the engine coupler on
page 36
■
Checking the circuit for loose or
damaged connections
See Checking the circuit for loose or
damaged connections on page 39
.
■
Testing the Y-CaPS unit output
See Yanmar Cathodic Protection System
on page 19
.
■
Checking the steering system for
loose, missing or damaged parts
See Checking the steering system for
loose, missing or damaged parts on
page 39
■
Checking the remote control for
loose, missing or damaged parts
See Remote Controls on page 16
Every Year
ZT370_OM.book 47 ページ 2013年9月27日 金曜日 午前10時16分