Yanmar ZT370, Operation Manual

Page: 42 / 60

MAINTENANCE
38
ZT370 Operation Manual
■
Retorqueing the gimbal ring to
steering shaft connection
Torque the gimbal ring locknuts
(1,
Figure 3 ) for the steering shaft
connection.
Figure 3
■
Inspecting the bellows and the
clamps
See General Inspection on page 34
.
■
Checking the engine alignment
Consult your authorized Yanmar Marine
dealer or distributor.
■
Lubricating the steering shaft
bushing
Apply approximately 8 to 10 pumps of
grease to the steering shaft bushing
grease fitting (1,
Figure 4 ). Use a typical
hand-operated grease gun to apply the
grease.
Figure 4
■
Lubricating the unit bearing
(gimbal housing)
Apply approximately 8 to 10 pumps of
grease to the unit bearing (gimbal housing)
grease fitting (1,
Figure 5 ) to lubricate the
unit bearing (gimbal housing). Use a
typical hand-operated grease gun to apply
the grease.
Figure 5
Gimbal ring locknut torque
N·m lb-ft
50 37
039063-00X00
1
Description Where used
Urea grease water
resistant type, NLGI #2
Steering shaft bushing
Description Where used
Urea grease water
resistant type, NLGI #2
Unit bearing
(gimbal housing)
039103-00X00
1
039064-00X00
1
ZT370_OM.book 38 ページ ２０１３年９月２７日 金曜日 午前１０時１６分