MAINTENANCE
42
ZT370 Operation Manual
NOTICE
Always be environmentally responsible.
Follow the guidelines of the EPA or other
governmental agencies for the proper
disposal of hazardous materials such as
lubrication oil, diesel fuel and engine
coolant. Consult the local authorities or
reclamation facility.
1. Remove the oil reservoir from the
bracket (1,
Figure 10
2. Empty the contents into a container
large enough to hold the drained gear
oil.
3. Install the oil reservoir (2,
the bracket.
4. Place the stern-drive in full trim limit
OUT position.
5. Remove the oil fill/drain plug
(1,
) and gasket
(2,
).
6. Drain the oil.
Figure 11
7. Remove the oil vent plug (1,
)
and gasket (2,
). Allow the oil
to drain completely.
Figure 12
NOTICE
If any water drains from the oil fill/drain
hole, or if it appears milky, the stern-drive
may be leaking and should be checked
immediately by your authorized Yanmar
Marine dealer or distributor.
039067-00X00
1
2
039082-00X00
2
1
039055-00X00
1
2
ZT370_OM.book 42 ページ ２０１３年９月２７日 金曜日 午前１０時１６分
