ENGINE SPECIFICATIONS
SPEC
2 - 10
Clutch plates
Thickness
1.5 ~ 1.7 mm (0.059 ~ 0.067 in)
----
Plate quantity
8
----
Maximum warpage
----
0.1 mm
(0.004 in)
Clutch springs
Free length
7.1 mm (0.280 in)
----
Spring quantity
1 spring per valve
----
Transmission
Transmission type
Constant mesh, 6-speed
----
Primary reduction system
Spur gear
----
Primary reduction ratio
88/47 (1.872)
----
Secondary reduction system
Chain drive
----
Secondary reduction ratio
43/17 (2.529)
----
Operation
Left-foot operation
----
Gear ratios
1st gear
38/17 (2.235)
----
2nd gear
36/19 (1.895)
----
3rd gear
35/21 (1.667)
----
4th gear
33/23 (1.435)
----
5th gear
31/24 (1.292)
----
6th gear
27/23 (1.174)
----
Maximum main axle runout
----
0.08 mm
(0.003 in)
Maximum drive axle runout
----
0.08 mm
(0.003 in)
Shifting mechanism
Shift mechanism type
Shift drum
----
Maximum shift fork guide bar
bending
----
0.05 mm
(0.002 in)
Installed shift rod length
294 mm (11.57 in)
----
Air filter type
Dry element
----
Fuel pump
Pump type
Electrical
----
Model (manufacturer)
5FL (MITSUBISHI)
----
Output pressure
450 ~ 600 kPa
(4.5 ~ 6.0 kgf/cm
2
, 64 ~ 85 psi)
----
Throttle bodies
ID mark
5FL1
----
Throttle valve
#100
----
Intake vacuum pressure
15.8 ~ 18.4 kPa
(120 ~ 140 mmHg, 4.72 ~ 5.51 in Hg)
----
Throttle cable free play (at the
flange of the throttle grip)
3 ~ 5 mm (0.12 ~ 0.20 in)
----
Item
Standard
Limit
Summary of Contents for YZF-R7
