3 - 38
CHK
ADJ
CHECKING THE BRAKE PADS/
ADJUSTING THE REAR BRAKE LIGHT SWITCH
EB304032
CHECKING THE BRAKE PADS
The following procedure applies to all of
the brake pads.
1. Operate the brake.
2. Check:
• front brake pad
• rear brake pad
Brake pad wear limit
a
Wear limit reached
→
Replace the
brake pads as a set.
Refer to “FRONT AND REAR BRAKES”
in chapter 7.
Å
Front brake
ı
Rear brake
Brake pad wear limit
0.5 mm (0.02 in)
Å
ı
EB304050
ADJUSTING THE REAR BRAKE LIGHT
SWITCH
NOTE:
• The rear brake light switch is operated
by movement of the brake pedal.
• The rear brake light switch is properly
adjusted when the brake light comes
on just before the braking effect starts.
1. Check:
• rear brake light operation timing
Incorrect
→
Adjust.
2. Adjust:
• rear brake light operation timing
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
a. Hold the main body
1
of the rear
brake light switch so that it does not
rotate and turn the adjusting nut
2
in
direction
a
or
b
until the rear brake
light comes on at the proper time.
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
Direction
a
Brake light comes on
sooner.
Direction
b
Brake light comes on
later.
Summary of Contents for YZF-R7
