3 - 33
CHK
ADJ
CHANGING THE COOLANT
EB303240
CHANGING THE COOLANT
1. Remove:
• bottom cowling
• front cowling
Refer to “COWLINGS”.
2. Remove:
• coolant reservoir bolts
1
• coolant reservoir cap
2
NOTE:
When draining the coolant from the
coolant reservoir, be sure to tilt the res-
ervoir so that coolant cannot flow
through the coolant reservoir breather
hose
3
.
3. Drain:
• coolant
(from the coolant reservoir)
4. Install:
• coolant reservoir bolts
2
2
1
1
5. Remove:
• radiator cap
1
WARNING
WARNING
A hot radiator is under pressure. There-
fore, do not remove the radiator cap
when the engine is hot. Scalding hot
fluid and steam may be blown out,
which could cause serious injury. When
the engine has cooled, open the radiator
cap as follows:
Place a thick rag or a towel over the
radiator cap and slowly turn the radia-
tor cap counterclockwise toward the
detent to allow any residual pressure to
escape. When the hissing sound has
stopped, turn the radiator cap counter-
clockwise while pressing down on it
and then remove it.
1
1
6. Remove:
• coolant drain bolt
1
(along with the copper washer)
7. Drain:
• coolant
Summary of Contents for YZF-R7
