Yamaha YZF-R1, Service Manual

Page: 570 / 808

C0520 (FI)
9-73
4. Installed condition of IMU.
• Check the installed direction and condition of the sensor.
• Check the grommet for cracks.
Joint coupler “2”
blue/white–any other coupler terminal
blue/black–any other coupler terminal
IMU coupler
blue/white–any other coupler terminal
blue/black–any other coupler terminal
red/white–any other coupler terminal
L / W L / W L / W L / W L / W L / W L / B L / B L / B L / B L / B L / B
L / W L / W L / W L / W L / W L / W L / W
L / B L / B L / B L / B L / B L / B L / B
**
*
L / R Gy L / B L P / W P V
W W / B L / W B / Y B / L Gy / G Br / W
Gy / B W / L L / W L / Y Gy / Y G / W G
L / R Gy L / B L P / W P V
W W / B L / W B / Y B / L Gy / G Br / W
Gy / B W / L L / W L / Y Gy / Y G / W G
B A
1
2
3
1
3
*. Joint coupler for YZF-R1
**. Joint coupler for YZF-R1M
Is resistance
∞ Ω
?
YES
→
Go to step 4.
NO
a. Replace the wire harness.
b. Turn the main switch to “ON”, and then check the condition of the DTC using the malfunction mode
of the YDT.
Is it in the “Recovered” condition ?
YES
→
Go to step 7, and complete the service.
NO
→
Go to step 4.
Is check result OK ?
YES
→
Go to step 5.
NO