Yamaha YZF-R1, Service Manual

Page: 13 / 808

FEATURES
1-4
YRC items MODE/PWR/TCS/SCS/EBM
The current MODE (YRC mode) and its related
PWR, TCS, SCS, and EBM settings are shown
here.
The individual settings for YRC items PWR,
TCS, SCS, LCS, QSS, LIF, EBM, and BC can
be organized into four groups and set inde-
pendently for each group. These groups of set-
tings are the YRC modes MODE-A, MODE-B,
MODE-C, and MODE-D. Use the mode switch
to change YRC modes or make YRC item set-
ting changes from the main screen.
TIP
The YRC modes come preset from the factory
for different riding conditions.
When using the factory presets, the suggested
YRC modes are as follows.
MODE-A: suitable for track riding
MODE-B: softer track-riding setting
MODE-C: suitable for road use
MODE-D: street use or rainy weather
[To change YRC modes or make setting
changes]
1. Push the mode switch center button to scroll
left to right and highlight the item you want to
adjust.
2. Use the mode switch up button or down but-
ton to change the selected item value (verti-
cal scrolling is not possible).
TIP
• When the malfunction indicator light is on, YRC
settings cannot be adjusted.
• When a YRC function is actively engaged that
item cannot be adjusted. For example, when
decelerating EBM cannot be adjusted.
• When a YRC item is highlighted but cannot be
adjusted, the YRC item box will return to black.
To turn off the traction control system select TCS
with the center button, then push and hold the up
button until TCS OFF is displayed. To turn TCS
back on, select TCS OFF and then press the
down button (TCS will return to its previous set-
ting).
TIP
Turning off the traction control system will turn
off the SCS, LCS, and LIF systems for all YRC
modes.
YRC items LCS/QS/LIF/BC
The on/off status of YRC items LCS, QSS, LIF,
and BC is shown here. When any of these sys-
tems are registered (not set to OFF) for the cur-
rently selected YRC mode, its respective icon
will appear.
When LCS is registered for the currently select-
ed YRC mode, its icon will be grey. To activate
the launch control system, press and hold the
center button until the LCS icon stops flashing
and turns white.
TIP
LCS, QSS, LIF, and BC system setting levels
can only be adjusted from the MENU screen.
ERS indicator (YZF-R1M)
This icon shows the current ERS mode. (Refer
to ““YRC Setting”” on page 1-7 and “ERS (YZF-
R1M)” on page 1-10 to change the registered
ERS mode or adjust ERS setting levels.) If the
ERS mode disappears from the ERS indicator
(the icon turns blank), stop the vehicle and wait
a few seconds until the mode reappears.
TIP
• The suspension will remain fixed at its most re-
cent settings until self-reset has completed.
1. Mode switch “MODE”
2. Up button
3. Center button
4. Down button
1
2
3
4
1
2
3
4
N
12
12 3 4
LAP
01
ODO 12 3 456
LATE S T
1000 r/min
MPH
12
MPH
GEAR
GP S LC S Q S LIF 10:00
MODE-
A
PWR
1
TC S
3
S C S
2
EBM
1
T-2
mile
2
MODE-
A
MODE-
A