manualshive.com logo in svg

Yamaha YZF-R1, Service Manual

The Yamaha YZF-R1 is a high-performance sport motorcycle designed to deliver adrenaline-fueled experiences on the road or track. Unlock the full potential of this exceptional machine with the free Owner's Manual, available for download at manualshive.com. Don't miss out on accessing the comprehensive manual that ensures optimal performance and safety.

Share
Download
background image

3

PERIODIC CHECKS AND ADJUSTMENTS

PERIODIC MAINTENANCE

............................................................................ 3-1

INTRODUCTION ....................................................................................... 3-1
PERIODIC MAINTENANCE CHART FOR THE EMISSION CONTROL 

SYSTEM ................................................................................................... 3-1

GENERAL MAINTENANCE AND LUBRICATION CHART ....................... 3-1
CHECKING THE VEHICLE USING THE YAMAHA DIAGNOSTIC 

TOOL ........................................................................................................ 3-4

CHECKING THE FUEL LINE (Primary injector) ........................................ 3-4
CHECKING THE FUEL LINE (Secondary injector) ................................... 3-4
CHECKING THE SPARK PLUGS ............................................................. 3-5
ADJUSTING THE VALVE CLEARANCE .................................................. 3-6
CHECKING THE ENGINE IDLING SPEED .............................................. 3-9
SYNCHRONIZING THE THROTTLE BODIES.......................................... 3-9
CHECKING THE THROTTLE BODY JOINTS ........................................ 3-11
CHECKING THE CRANKCASE BREATHER HOSE .............................. 3-11
CHECKING THE EXHAUST SYSTEM.................................................... 3-11
CHECKING THE CANISTER (for California only) ................................... 3-11
CHECKING THE AIR INDUCTION SYSTEM.......................................... 3-12
REPLACING THE AIR FILTER ELEMENT ............................................. 3-12
ADJUSTING THE CLUTCH LEVER FREE PLAY................................... 3-12
CHECKING THE BRAKE OPERATION .................................................. 3-13
CHECKING THE BRAKE FLUID LEVEL................................................. 3-13
ADJUSTING THE FRONT DISC BRAKE................................................ 3-14
CHECKING THE FRONT BRAKE PADS ................................................ 3-14
ADJUSTING THE REAR DISC BRAKE .................................................. 3-14
CHECKING THE REAR BRAKE PADS .................................................. 3-15
CHECKING THE FRONT BRAKE HOSES ............................................. 3-15
CHECKING THE REAR BRAKE HOSE .................................................. 3-15
BLEEDING THE HYDRAULIC BRAKE SYSTEM (ABS) ......................... 3-16
CHECKING THE WHEELS ..................................................................... 3-17
CHECKING THE TIRES.......................................................................... 3-17
CHECKING THE WHEEL BEARINGS .................................................... 3-18
CHECKING THE SWINGARM OPERATION .......................................... 3-18
LUBRICATING THE SWINGARM PIVOT ............................................... 3-18
DRIVE CHAIN SLACK............................................................................. 3-18
LUBRICATING THE DRIVE CHAIN ........................................................ 3-19
CHECKING AND ADJUSTING THE STEERING HEAD ......................... 3-19
LUBRICATING THE STEERING HEAD.................................................. 3-20
CHECKING THE STEERING DAMPER.................................................. 3-20
CHECKING THE CHASSIS FASTENERS .............................................. 3-20
LUBRICATING THE BRAKE LEVER ...................................................... 3-20
LUBRICATING THE CLUTCH LEVER.................................................... 3-20
LUBRICATING THE PEDAL ................................................................... 3-20
CHECKING THE SIDESTAND................................................................ 3-21
LUBRICATING THE SIDESTAND........................................................... 3-21
CHECKING THE SIDESTAND SWITCH................................................. 3-21
CHECKING THE FRONT FORK ............................................................. 3-21
ADJUSTING THE FRONT FORK LEGS (for YZF-R1) ............................ 3-21

Summary of Contents for YZF-R1









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for YZF-R1

Hard Head 791221 Operating Instructions Manual preview
791221
Brand: Hard Head Pages: 40
Harbor Freight Tools 3394 Assembly And Operating Instructions Manual preview
3394
Brand: Harbor Freight Tools Pages: 7
Racing PY Series Installation Manual Book preview
PY Series
Brand: Racing Pages: 13
J5create Wormhole Station JUH-320 User Manual preview
Wormhole Station JUH-320
Brand: J5create Pages: 24
Yamaha FJR1300AS Assembly Manual preview
FJR1300AS
Brand: Yamaha Pages: 94
Yamaha FJR1300(S) Supplementary Service Manual preview
FJR1300(S)
Brand: Yamaha Pages: 44
hepco & becker 6617530 01 01 Mounting Instructions preview
6617530 01 01
Brand: hepco & becker Pages: 6
Badabulle B037003 Instruction Manual preview
B037003
Brand: Badabulle Pages: 15
AirTest TR-5200 Operation & Maintenance Manual preview
TR-5200
Brand: AirTest Pages: 4
Flymo 532430614 Manual preview
532430614
Brand: Flymo Pages: 24
Kingpin TAB Series Operation Manual preview
TAB Series
Brand: Kingpin Pages: 4
Miller MTL-20 Torches Owner'S Manual preview
MTL-20 Torches
Brand: Miller Pages: 18
My Child Hideaway Instructions Manual preview
Hideaway
Brand: My Child Pages: 12
SIIG USB 3.0 Dual Head Docking Station Quick Installation Manual preview
USB 3.0 Dual Head Docking Station
Brand: SIIG Pages: 12
Thunderbike 72-72-125 Installation Instructions Manual preview
72-72-125
Brand: Thunderbike Pages: 11
Wolfman Monarch Pass M321 Mounting Instructions preview
Monarch Pass M321
Brand: Wolfman Pages: 5
Havis-Shields Silver Billet KR-800 Specifications preview
Silver Billet KR-800
Brand: Havis-Shields Pages: 1
Ikelite 9523.61 Instruction Manual preview
9523.61
Brand: Ikelite Pages: 4

Brands by name

Popular brands

Load more brands