Yamaha YZF-R1, Service Manual

Page: 439 / 808

IGNITION SYSTEM
8-4
EAS30492
TROUBLESHOOTING
The ignition system fails to operate (no spark or intermittent spark).
TIP
• Before troubleshooting, remove the following part(s):
1. Front side cowling/Front panel
2. Rider seat
3. Fuel tank cover
4. Fuel tank
5. Air filter case
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
OK
→
NG
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
1. Check the fuses.
(Main, ignition and backup)
Refer to “CHECKING THE FUS-
ES” on page 8-41.
Replace the fuse(s).
2. Check the battery.
Refer to “CHECKING AND
CHARGING THE BATTERY” on
page 8-42. • Clean the battery terminals.
• Recharge or replace the battery.
3. Check the spark plugs.
Refer to “CHECKING THE SPARK
PLUGS” on page 3-5. Re-gap or replace the spark plug(s).
4. Check the ignition spark gap.
Refer to “CHECKING THE SPARK
PLUGS” on page 3-5. Ignition system is OK.
5. Check the ignition coils.
Refer to “CHECKING THE IGNI-
TION COILS” on page 8-44. Replace the ignition coil(s).
6. Check the crankshaft position sen-
sor.
Refer to “CHECKING THE CRANK-
SHAFT POSITION SENSOR” on
page 8-45.
Replace the crankshaft position sensor.
7. Check the cylinder identification
sensor.
Refer to “CHECKING THE CYLIN-
DER IDENTIFICATION SENSOR”
on page 8-50.
Replace the cylinder identification sensor.