FEATURES
1-9
Odometer, tripmeters, fuel reserve tripmeter
and clock
Push the “SELECT” switch to change the display
between the odometer mode “ODO”, the tripme-
ter modes “TRIP A” and “TRIP B” in the following
order:
ODO
→
TRIP A
→
TRIP B
→
ODO
If the fuel level warning light comes on, the
odometer display will automatically change to
the fuel reserve tripmeter mode “F-TRIP” and
start counting the distance traveled from that
point. In that case, push the “SELECT” switch to
change the display between the various tripme-
ter and odometer modes in the following order:
F-TRIP
→
TRIP A
→
TRIP B
→
ODO
→
F-TRIP
To reset a tripmeter, select it by pushing the “SE-
LECT” switch, and then push the reset switch for
at least one second. If you do not reset the fuel
reserve tripmeter manually, it will reset itself au-
tomatically, and the display will return to the prior
mode after refueling and traveling 5 km (3 mi).
To set the clock
1. Push the “SELECT” and reset switches to-
gether for at least three seconds.
2. When the hour digits start flashing, push the
reset switch to set the hours.
3. Push the “SELECT” switch, and the minute
digits will start flashing.
4. Push the reset switch to set the minutes.
5. Push the “SELECT” switch and then release
it to start the clock.
Self-diagnosis devices
This model is equipped with a self-diagnosis de-
vice for various electrical circuits.
If any of those circuits are defective, the engine
trouble warning light will come on, and then the
odometer/tripmeter/clock display will indicate a
two-digit error code.
If the odometer/tripmeter/clock display indicates
any error codes, note the code number, and
then have a Yamaha dealer check the vehicle.
CAUTION:
ECA1D77001
If the display indicates an error code, the ve-
hicle should be checked as soon as possible
in order to avoid engine damage.
Brightness control mode
This function allows you to adjust the brightness
of the multi-function meter unit panel to suit the
outside lighting conditions.
1. Odometer/tripmeter/fuel reserve
tripmeter/clock
1. Clock
1. Multi-function meter unit panel
Summary of Contents for XV19SX(C)
