Yamaha XV19SX(C), Service Manual, Page: 186 / 494

REAR WHEEL
4-33
EAS22110
CHECKING THE REAR WHEEL DRIVE HUB
1. Check:
• Rear wheel drive hub
Cracks/damage
→
Replace.
• Rear wheel drive hub dampers
Damage/wear
→
Replace.
EAS22130
CHECKING AND REPLACING THE REAR
WHEEL PULLEY
1. Check:
• Rear wheel pulley
Surface plating has come off
→
Replace the
rear wheel pulley.
Bent teeth
→
Replace the rear wheel pulley.
2. Replace:
• Rear wheel pulley
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Remove the self-locking nuts and the rear
wheel pulley.
b. Clean the rear wheel drive hub with a clean
cloth, especially the surfaces that contact the
pulley.
c. Install the new rear wheel pulley.
NOTE:
Tighten the self-locking nuts in stages and in a
crisscross pattern.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
EAS22140
ASSEMBLING THE REAR WHEEL
1. Install:
• Wheel bearings
• Oil seals
Refer to “ASSEMBLING THE FRONT
WHEEL” on page 4-23.
EAS22150
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
• After replacing the tire, wheel or both, the rear
wheel static balance should be adjusted.
• Adjust the rear wheel static balance with the
brake disc and rear wheel drive hub installed.
1. Adjust:
• Rear wheel static balance
Refer to “ADJUSTING THE FRONT WHEEL
STATIC BALANCE” on page 4-23.
EAS28770
INSTALLING THE REAR WHEEL (DISC)
1. Lubricate:
• Rear wheel axle
• Oil seal lips
2. Install:
• Rear brake disc
• Rear brake disc cover
NOTE:
• Apply locking agent (LOCTITE®) to the
threads of the brake disc bolts.
• Tighten the brake disc bolts in stages and in a
crisscross pattern.
3. Check:
• Rear brake disc
Refer to “CHECKING THE REAR BRAKE
DISC” on page 4-53.
4. Install:
• Rear wheel axle
• Washer
• Rear wheel axle nut
T
R
.
.
Rear wheel pulley self-locking
nut
95 Nm (9.5 m·kg, 68 ft·lb)
New
New
Recommended lubricant
Lithium-soap-based grease
T
R
.
.
Rear brake disc bolt
18 Nm (1.8 m·kg, 13 ft·lb)
LOCTITE®
LT