Yamaha XV19SX(C), Service Manual, Page: 241 / 494

REAR SHOCK ABSORBER ASSEMBLY AND SWINGARM
4-88
2. Install:
• Bearings “1”, “2”, “3”
(to the relay arm)
• Oil seals “4”, “5”
(to the relay arm)
3. Lubricate:
• Bushings
• Oil seals
• O-rings
• Collar
NOTE:
Apply grease only to the collar between the con-
necting arms and rear shock absorber.
4. Install:
• Bushings “1”
(to connecting arms)
• Spacer “2”
CAUTION:
EC1D71010
When inserting the spacer into the connect-
ing arms and the rear shock absorber, be
careful not to damage the bushings and O-
rings.
NOTE:
Install the bushings so that the slits “b” in the
bushings are within the areas shown in the illus-
tration.
5. Install:
• Connecting arms
• Rear shock absorber assembly
(to relay arm)
• Relay arm
(to the swingarm)
NOTE:
Be sure to face the “FWD” mark “a” on the relay
arm “1” toward the front of the vehicle and to
face the label “b” on the rear shock absorber “2”
downward.
Installed depth “a”
4.5 mm (0.18 in)
Installed depth “b”
1.0 mm (0.04 in)
Installed depth “c”
6.0 mm (0.24 in)
Installed depth “d”
2.5 mm (0.10 in)
A. Right side
B. Left side
Recommended lubricant
Lithium-soap-based grease
c
d
d
c
b b
a
1
5
4
3
3
2
4
5
4
A B
4
b b
a a
Installed depth “a”
4.5 mm (0.18 in)
3. Connecting arm
4. Rear shock absorber
A. Right side
B. Left side
C. 90°
2
a a a a
A B
3
3
1 1
4
1
3
b
C
C