Yamaha XV19SW 2006, Service Manual

Page: 51 / 145

TIGHTENING TORQUES
2-26
* For XV19CTS(C), XV19CT(C) and XV19CTM(C)
NOTE:
1. First, tighten the lower ring nut to approximately 52 Nm (5.2 m·kg, 37 ft·lb) with a torque wrench, then
loosen the lower ring nut completely.
2. Retighten the lower ring nut to 18 Nm (1.8 m·kg, 13 ft·lb) with a torque wrench.
Drive pulley cover bolt M6 4 10 Nm (1.0 m·kg, 7.2 ft·lb)
Rectifier/regulator cover bolt M6 6 10 Nm (1.0 m·kg, 7.2 ft·lb)
Lead cover bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Rectifier/regulator bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Drive pulley cover plate bolt M6 3 5 Nm (0.5 m·kg, 3.6 ft·lb)
Wire harness guide bolt M6 1 7 Nm (0.7 m·kg, 5.1 ft·lb)
Throttle cable guide bolt (upper
side)
M6 1 7 Nm (0.7 m·kg, 5.1 ft·lb)
Throttle cable guide bolt (lower
side)
M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Rear shock absorber locknut M50 1 30 Nm (3.0 m·kg, 22 ft·lb)
Windshield holder bracket as-
sembly bolt*
M8 4 30 Nm (3.0 m·kg, 22 ft·lb)
Windshield holder nut* M8 4 23 Nm (2.3 m·kg, 17 ft·lb)
Windshield bracket brace nut* M6 4 10 Nm (1.0 m·kg, 7.2 ft·lb)
Windshield brace nut* M6 6 10 Nm (1.0 m·kg, 7.2 ft·lb)
Windshield lock nut* M24 1 12 Nm (1.2 m·kg, 8.7 ft·lb)
Windshield lock cover nut* M6 1 8 Nm (0.8 m·kg, 5.8 ft·lb)
Backrest upper bracket and back-
rest lower bracket bolt*
M8 4 23 Nm (2.3 m·kg, 17 ft·lb)
Backrest pad and backrest up-
per bracket bolt*
M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Backrest pad and backrest up-
per bracket stay bolt*
M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Backrest lock nut* M24 1 12 Nm (1.2 m·kg, 8.7 ft·lb)
Passenger footrest and sidebag
bracket bolt (left and right)*
M10 4 47 Nm (4.7 m·kg, 34 ft·lb)
Sidebag bracket bolt* M8 4 23 Nm (2.3 m·kg, 17 ft·lb)
Sidebag bracket brace nut* M8 2 23 Nm (2.3 m·kg, 17 ft·lb)
Item
Thread
size
Q’ty Tightening torque Remarks
LT
LT
LT
LT
LT