Yamaha XV19SW 2006, Service Manual

Page: 143 / 145

FRONT WHEEL
4-18
EAS21900
REMOVING THE FRONT WHEEL
1. Stand the vehicle on a level surface.
WARNING
EWA13120
Securely support the vehicle so that there is
no danger of it falling over.
2. Remove:
• Right front fender stay “1”
• Left front fender stay “2”
• Front fender stay rod “3”
NOTE:
• Remove the right front fender stay bolts and
left front fender stay bolt (rear side), then hold
the rod with a wrench “4” and remove the left
front fender stay bolt (front side) “5”.
• Remove the rod from the right side of the vehi-
cle.
3. Loosen:
• Front wheel axle pinch bolt “1”
4. Remove:
• Front brake calipers
NOTE:
Do not apply the brake lever when removing the
brake calipers.
5. Elevate:
• Front wheel
NOTE:
Place the vehicle on a suitable stand so that the
front wheel is elevated.
EAS21910
DISASSEMBLING THE FRONT WHEEL
1. Remove:
• Oil seals
• Wheel bearings
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Clean the outside of the front wheel hub.
b. Remove the oil seals “1” with a flathead
screwdriver.
NOTE:
To prevent damaging the wheel, place a rag “2”
between the screwdriver and the wheel surface.
c. Remove the wheel bearings “3” with a gener-
al bearing puller.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
EAS21920
CHECKING THE FRONT WHEEL
1. Check:
• Front wheel axle
Roll the wheel axle on a flat surface.
Bends
→
Replace.
WARNING
EWA13460
Do not attempt to straighten a bent wheel ax-
le.
1
2
3
5
4
1