Yamaha V50, Authorized Product Manual

Page: 59 / 161

for carrier operators, aftertouch will affect volume.
If you raise the EBS setting for modulator operators,
aftertouch will affect tone.
Note:
Unless the sensitivity EBS setting is raised for the
operators you want to affect, aftertouch will have
no effect.
Note:
If you do not want aftertouch to affect volume or tone,
set this to 0.
Reverb
After pressing (FUNCTION), press the
below “REVR” in the display.
Press the below “ > EXIT” in the display to return
to the previous display.
Function
Set a simulated reverb effect.
Settings
off, 0 – 7
Explanation
A setting of "off" gives no effect. A setting of 1 gives
the most effect (long reverb) and a setting of 7 gives
the shortest effect (short reverb).
Note:
This effect has no connection with the reverb produced
by the V50 DSP effect unit. When the output level
of operator 1 drops below a certain level (– 18dB),
this “reverb” effect slows the RR (RELEASE RATE)
to artificially create a “reverb-type” or “simulated
reverb” effect. When using this, be aware of the fol-
lowing points.
If the RR setting of operator 1 is low (a slow
decay), the output level will take a long time to drop
below – 18dB, and the reverb effect will not be heard.
If the AR setting of operator 1 is 0, the output
level will already be below – 18dB, causing this
“reverb” to start immediately, and making the sound
linger for a long time.
54
Voice Edit
Voice name
After pressing (FUNCTION), press the
below “NAME” in the display.
Press the below “ > EXIT” in the display to return
to the previous display.
Function
Set a voice name.
Settings
Up to 10 characters
Explanation
This allows you to set a voice name for the voice you
are editing. Page 17 explains how to enter characters.
Effect select, effect balance
Press (EFFECT).
(1) Effect select
Function
Select the type of DSP effect to use with this voice.
Settings
off, or one of the following types of effect
Explanation
Select one of the following types of effect.
0: off
No effect
1: Reverb Hall
Reverberation of a large hall
2: Reverb Room
Reverberation of a smaller room
3: Reverb Plate
Reverberation typical of a plate reverb unit
4: Delay
Delayed sound