Yamaha V50, Authorized Product Manual

Page: 138 / 161

a - 1 ) When transmitting ALL.
header (block1)
PMEM2 (00-24)
PMEM (00-24)
header (block2)
PMEM2 (25-49)
PMEM (25-49)
header (block3)
PMEM2 (50-74)
PMEM (50-74)
header (block4)
PMEM2 (75-99)
PMEM (75-99)
SETUP . . . . . . . . . . . . . . . . . System (SYSQ)
SSONG . . . . . . . . . . . . . . current sequence song data
NSEQ . . . . . . . . . . . . . . . . current sequence data
If “SeqALL” is selected and transmission executed, the above three
types of data will be sucessively transmitted in the following order.
1. SSONG
2. NSEQ
3. SETUP
For details of each bulk dump data format, see table 2 for SETUP,
and see the format table of the sequencer section for NSEQ and
SSONG.
a-2) When transmitting one block at a time.
header (specified block)
PMEM2
PMEM
b) Reception
When PMEM is received, “Midi Received” and the name of the
received block will be displayed. PMEM 32 performance bulk data
without a header is loaded directly into PFI00 – PFI31.
When data is received, operation is as follows. – indicates that the
data does not change.
Received data
Buffer PCED PCED2 PMEM PMEM2
PCED only
PCED2 only
PCED2 + PCED set
set
default
s e t
set
4.6 RHYTHM data bulk dump
This transmits and receives system setup data and sequence data for
the V50 rhythm machine. (Data is not received while playing.) For
transmission, the data is divided into four types of bulk data.
SETUP . . . . . . . . . . . . . . . . . . System (SYSR)
. . . . . . . . . . . . . . . . . . inst setup (RINST)
. . . . . . . . . . . . . . . . . . keyboard assign table (RKAT1,2)
RSEQ . . . . . . . . . . . . . . . . . . . . rhythm sequence data
If “RhyqALL” is selected and transmission executed, data will be
transmitted in the following order.
1) SYSR
2) RINST
3) RKAT1
4) RKAT2
5) RSEQ
For details of each bulk dump data format, see table 4.
4.7 Dump request
PMEM only
PMEM2 only
PMEM2 + PMEM
set
set
default
set
set
Dump request is possible for all types of bulk data.
For details of each message, see table 5.
4.4 SYNTH system setup data bulk dump
This transmits and receives the system setup data of the V50. For
transmission, this is divided into four types of bulk data. (EF is divided
into EFG1 – EFG4.) SYS2 data contains parameters added to TX81Z
parameters for the DX11. SYS3 data contains parameters added to
DX11 parameters for the V50.
SYS . . . . . . . . . . . . .... System (SYS3 SYS2 SYS)
PCT. . . . . . . . . . . . . . . . . . . .Program Change table
P.EFCT . . . . . . . . . . . . . . . Effect data (EFG1, 2, 3, 4)
MCT . . . . . . . . . . . . . . . . . . . . . Micro tuning data (OCT, FULL)
When “SetALL” is selected and transmission executed to transmit all
of the above data (except for System data), the data will be transmitted
in the following order.
5. System common messages (for SEQ/RHYTHM)
5.1 Status F2 (song position pointer)
Received only. (except in REC mode of SEQ/R)
5.2 Status F1, F3 . . . F7
Aside from internally registering as status bytes, these have no effect.
6. System realtime messages (for SEQ/RHYTHM)
6.1 Status F8, FA, FB, FC
Received.
1. PCT
2. P.EFCT (EFGl 2 3 4 )
3. MCT Transmits/receives the data currently in the OCT,
FULL micro tuning buffers.
6.2 Status F9, FD, FF
After decoding, these have no effect.
For details of each bulk dump data format, see tables 2 and 3.
EFG n (n = 1 – 4) indicates the set of delay n, pan n, and chord
6.3 Status
FE
(active sensing)
a) Transmission
FE is transmitted at intervals of approximately 170msec.
n.
b) Reception
4.5
SEQ data bulk dump
This transmits and receives system setup data and sequence data for
the currently selected song of the V50 internal sequencer. When re-
ceiving sequence data, it will be loaded into the current song only if
the current song is empty. (Data is not received while playing.) For
transmission, the data is divided into three types of bulk data.
Once FE is received, if no MIDI data appears for longer than ap-
proximately 300msec, the MIDI reception buffer is cleared, and if
there are remaining Key Ons, they are turned Off.
133