Yamaha V50, Authorized Product Manual

Page: 114 / 161

The upper line of the display will show the
percentage of the total disk that has been copied.
Repeat steps (5) - (8) until backup is completed.
When backup is completed, you will get the
message “Backup completed !”
Status
This allows you to check the condition of the disk. The
number of files, total used bytes, and total remaining
bytes will be displayed.
(1) Insert the disk into the disk drive.
(2) Press to get the following display.
(3) Press the below “ > Job” to get the following
display.
You can press the below “ > EXIT” to return
to the previous display.
(4) Press the below “ > Status” to get a display
like the following.
The lower line shows the number of files on disk,
total used bytes, and total remaining bytes.
MEMORY PROTECT
Memory protect (internal, card)
Press to get the following display.
Memory protect keeps internal and card memory from
being accidently written over and lost.
(1) Internal
Function
Protect setting for internal memory.
Settings
off, on
Explanation
This turns internal memory protect on/off. When set
to “on”, voice or performance data cannot be stored
to internal memory, nor can card, disk, or MIDI data
be loaded into memory. When the power is turned
on, this will be set “on”.
(2) Card
Function
Protect setting for card memory
Settings
off, on
Explanation
This turns card memory protect on/off. When set to
“on”, voice or performance data cannot be stored to
card memory, nor can internal data be saved into card
memory. When the power is turned on, this will be
set “on”.
Note:
The card itself also has a memory protect switch. If
the card switch is on, data cannot be saved even if
this the card memory protect is turned “off”.
Utility functions 109