Yamaha V50, Authorized Product Manual

Page: 87 / 161

REALTIME RECORDING PROCEDURE
Here we will explain the procedure for realtime recording. The procedure can be il-
lustrated as follows.
Begin sequencer operations.
Select the song you want to record.
Select realtime recording.
Select the track to be recorded, the voices and
time signature, tempo, etc.
Start and end realtime recording.
Select sequencer operation Select realtime recording
From performance play mode, single play mode, or
rhythm mode, enter the sequencer mode as follows.
(1) Press to enter sequencer mode and get the
following display.
All sequencer operations are carried out in this mode.
Select a song to record
Select the number of the song to be recorded.
(1) Move the cursor to the far left, and specify a song
1 – 8 to record. If setup data has already been stored
for the song, the display may show “withSETUP”
or “Song only” when you select the song. (This
choice is explained on page 87.)
82 Using the sequencer
Here we will explain the most basic way to select realtime
recording. For details, see page 94.
(1) Press to get the following display.
(2) Press the below “ > Rec” to get the following
display.
(3) Making sure that the cursor is located at “ > Mode”,
select the recording mode. Select from “Realtime”,
“Step”, or “Punch”. In this example we will select
“Realtime”.
(4) Move the cursor to “ > Condition”, and set the re-
cording condition. Select from “Replace” (replace
the previous recording) and “Overdub” (add to the
previous recording). In this example we will select
“Replace”.
(5) Press the below “ > EXIT” twice.