Yamaha V50, Authorized Product Manual

Page: 103 / 161

Load
Load allows you to load data from the card into V50
memory.
Note:
If the memory protect (internal) is “on”, you will get
an error message of “Memory Protected”, and will
not be able to load. (However, R.SEQ is an excep-
tion.)
(1) Press to get the following display.
When you execute load, the voice, performance,
and setup data etc. will be lost. Be careful not to
overwrite any data you wanted to keep.
(5) Press a to select the type of data to load. The
chart on page 96-97 explains the contents of each
type. You will get a message of “Are you sure?”
(6) Press and the data will be loaded from card
to V50 internal memory.
(2) Select the bank from which to load. When using
an MCD32, select 1. When using an MCD64, select
1 or 2.
(3) Press the below “ > Load” to get the following
display.
(4)
Press a to select one of the following types
of data to load.
Synth . . . . . . . . . . . Load synthesizer data.
Rhythm(A) . . Load rhythm machine data from bank
section A.
Rhythm(B) . . . Load rhythm machine data from bank
section B.
SEQ(YS)...... Load sequence data from a
YS200/B200 synthesizer.
If you have selected “Synth”, the following display
will appear.
If you have selected "Rhythm(A)" or "Rhythm(B)",
the following display will appear.
If you have selected “SEQ(YS)”, proceed to step (6).
98 Utility functions