Yamaha V50 Authorized Product Manual Download Page 125

Page: 125 / 161

COPY FUNCTIONS

Effect copy

While setting voice or performance (EFFECT)

data, press to get the following display.

Function

Copy effect settings between voices or performances.

Explanation

This function copies the effect settings of the currently
selected voice or performance to another voice or
performance.

While continuing to press specify

the voice number or performance number copy des-

tination. When you have input the store destination,
release You will be asked “OK?”,
and when you press the effect settings will be
stored to the specified voice or performance.

Note:

When internal memory protect is on, effects cannot
be copied to internal memory.

When card memory protect is on, or when the

card memory protect slider is on, effects cannot be
copied to card memory.

Effects cannot be copied to a card that has not

been formatted.

Performance effect copy

While setting performance effects, press

to get the following display.

Function

Copy settings between each type of performance effect
1 – 4 .

Explanation

This function copies the settings of the currently se-

lected performance effect to another performance
effect of the same type.

120

Utility functions

While continuing to press specify

the copy destination, and then release

You will be asked “OK?”, and when

you press the performance effect settings will
be copied to the specified performance effect.

Note:

A performance effect can be copied only to another
performance effect of the same type.

Envelope generator copy

While setting a voice’s envelope generator, press

to get the following display.

Function

Copy envelope generator settings between operators.

Explanation

This function copies the following settings (envelope
generator and keyboard scaling) from one operator
to another operator.

Envelope generator data

. . . . AR, D1R, D2R, RR

(SHIFT is not included)

Keyboard scaling data . . . . . . . .

LS, RS

While continuing to press specify the
copy source and destination, and then release

When you specify the destination,

the envelope generator settings will be copied between
the specified operators.

Summary of Contents for V50


































































































































































Search results

Summary of Contents for V50

Reviews:

Related manuals for V50

Brands by name

Popular brands

Yamaha V50, Authorized Product Manual

Search results

Summary of Contents for V50

Reviews:

Related manuals for V50

Brands by name

Popular brands