Yamaha V50, Authorized Product Manual

Page: 95 / 161

SETTING TRANSMIT CHANNELS
In sequencer mode, press to get the following
display.
Set the MIDI channel on which each sequencer track The lower line of each display shows the channel that
will transmit data. each track will transmit. In single mode, the upper right
of the display will show the receive channel. In multi
mode, the upper line (“R”) will show the receive channel
for each instrument.
Press the below “ > Tch” to get the following
display. (The displays will differ depending on whether
the synthesizer mode is Single Play mode or Performance
Play mode.
If a synthesizer Voice is selected (single mode).
If a synthesizer Performance is selected (multi mode).
Function
Set the output channel of each track.
Settings
off, 1 – 16
Explanation
This sets the MIDI channel that each track of the
sequencer will transmit.
In single mode (single play mode), the V50 will
play only the track data that is transmitted on a
channel that matches the tone generator “Rch =”
setting.
In multi mode (performance play mode), each
track will play the instrument that matches its transmit
channel (the lower line).
“off” indicates that data is not transmitted.
SONG JOB FUNCTIONS
Here you can name or clear a song.
In sequencer play mode, select the song to name (or
clear), and press to get the following display.
(1) Song name
Function
Set a name for the song.
Press the below “> Song” to get the following
display.
Settings
Maximum of 8 characters.
Explanation
Set a name for the song. Page 17 explains how to enter
characters.
(2) Song clear
Function
Erase the song data.
Pressing the below “ > EXIT” will return to the
Explanation
previous display.
This function erases the song name and the data
of all tracks, and will initialize meter and tempo,
etc.
Press the below “ > GO”. Press in re-
sponse to the confirming message, and the song will
be erased.
90 Using the sequencer