Configuration screens
Reference Manual
TF Series
- 71 -
DCA ASSIGN screen menu
Press the Menu key (
) from the DCA ASSIGN screen to display the following options.
DCA roll out
You can assign DCA groups 1–8 to the last 8 channel strips on the right side of the console's
top panel.
(TF5: channel strips 25–32; TF3: 17–24; TF1: 9–16)
You can then assign the channels of a DCA group to the channel strips on the left side of the
console's top panel by pressing the corresponding DCA group's [SEL] key.
(TF5: channel strips 1–24; TF3: 1–16; TF1: 1–8)
The number of channels in the group that will be assigned to the channels strips depends on
the model number. For the TF5 console, the 24 lowest numbered channels in the group are
assigned; the lowest 16 for the TF 3, and the lowest 8 for the TF1.
This feature allows you to manipulate the channels strips for both the DCA group master and
the group's "member" channels at the same time.
Assigning channels to a DCA group
1.
Press the [INPUT1] and [INPUT2] buttons on the top panel simultaneously to display
the GROUP channels.
2.
Press a [SEL] button on the top panel that corresponds to the DCA group that you
want to configure.
3.
Touch the DCA buttons that correspond to the channels you want to assign to the
group. (You can select multiple channels.)
The selected channels are displayed in the channel display area.
1
Clear All icon
Removes all channels from the group.
Channel is selected
ձ
Member channels of selected DCA group
assigned to these channel strips
DCA groups 1–8
assigned to these
channel strips
