Yamaha TF1 Reference Manual Download Page 68

Page: 68 / 91

Configuration screens

Reference Manual

TF Series

- 68 -

GEQ screen menu

Press the Menu key (

) from the GEQ screen to display the following options.

OUTPUT screen

Allows you to configure how output channels will be output. The buttons displayed vary
depending on the type of output channel selected.

○

: Displayed

– : Not displayed

ST button

Determines whether the stereo channel is output or not.

Out Gain text box

Allows you to adjust the output gain.
When selected, you can use the [TOUCH AND TURN] knob to adjust the setting. Touch
again to display the keyboard and enter a value.

Using faders to adjust GEQ

Touch the Fader Assign button to turn it on.

The current gain setting for each band is applied to the faders
in the channel strip section of the console.

You can confirm the frequency and gain for each band in the channel display.

For TF3 and TF1, swipe left or right on the gain sliders in the GEQ screen to select
other bands.

You can swipe the EQ graph, RTA display, or band selection area left or right to select other bands.

For TF5, all bands are applied to the faders.

Use the console's faders to adjust the gain.

If you turn on a channel's [ON] key, you can reset the gain of frequencies assigned to that channel to
0 dB.

When you are finished making adjustments, touch the Fader Assign button to turn
it off.

Fader Assign also turns off when you switch another screen or enter SENDS ON FADER mode.

Copy icon

Copies the GEQ parameters of the selected
channel to the clipboard.

Paste icon

Pastes the GEQ parameters in the clipboard to the
selected channel.

Compare icon

Allows you to compare the GEQ parameters of the
selected channel with the GEQ parameters in the
clipboard by switching between the two.

Default icon

Resets the GEQ settings for the current channel to
their default values.

Output channel

Buttons

ST button

Out Gain

Buttons

button

OMNI OUT

Indicator

OMNI OUT

Buttons

AUX 1–8

–

○

AUX9/10–AUX19/20

○

SUB

–

○

STEREO

–

○

Summary of Contents for TF1




























































































Search results

Summary of Contents for TF1

Reviews:

Related manuals for TF1

Brands by name

Popular brands

Yamaha TF1, Reference Manual

Search results

Summary of Contents for TF1

Reviews:

Related manuals for TF1

Brands by name

Popular brands