Yamaha TF1 Reference Manual Download Page 70

Page: 70 / 91

Configuration screens

Reference Manual

TF Series

- 70 -

SEND FROM screen menu

Press the Menu key (

) from the SEND FROM screen to display the following options.

DCA ASSIGN screen

Allows you to group channels together by assigning them to DCA groups.

Channel display area

Displays the channels that are assigned to the current DCA group.

DCA ASSIGN buttons

Allow you to select which channels are assigned to the current DCA group.
Selected channels are highlighted.

CH VIEW button

Displays the CH VIEW screen. (



page 59

)

Recall Safe button (V1.1 and later)

Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by touching the jump button in the right corner
of the Recall Safe button.

Adjusting the SEND FROM level

Touch the ON button for the input channels
that you want to send.

Touch the send pan slider, and then use the
[TOUCH AND TURN] knob to adjust the pan
of the input channel signal that is sent.

Drag the send level sliders to adjust the
amount of input channel signal that is sent.

All Pre icon

Turns on all Pre buttons.

All Post icon

Turns off all Pre buttons.

All Nominal icon (V2.0 and later)

Sets all SEND levels to nominal (0 dB).

Dup. STEREO icon (V2.0 and later)

Duplicate STEREO. Copies each channel's fader
level and applies it to the SEND level.

Send level slider

Send pan slider

ON button

Pre button

Summary of Contents for TF1




























































































Search results

Summary of Contents for TF1

Reviews:

Related manuals for TF1

Brands by name

Popular brands

Yamaha TF1, Reference Manual

Search results

Summary of Contents for TF1

Reviews:

Related manuals for TF1

Brands by name

Popular brands