background image

Configuration screens

Reference Manual

TF Series

- 62 -

B

Channel output level meter

Displays the channel's output signal level.

FX1L–FX2R

1

Channel name

Touch to display the CH NAME screen.
Touch 

 to display information for a different channel.

2

Recall Safe button

Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen (

page 23

) by touching the jump button in 

the right corner of the Recall Safe button.

3

Mute Safe button

Touch to temporarily exclude the selected channel from the effects mute group.
If you mute the effects mute group, any channels in that group that have mute safe 
enabled will not be muted.

4

Boxes

Touch to display the configuration screen for the corresponding feature.
You can touch the EQ button displayed here to turn EQ on and off.

FX1 (FX2) box

: Displays the FX screen. (

page 52

)

EQ box

: Displays the EQ screen. (

page 44

)

5

Channel on/off button

Turns the selected channel on and off.

6

Channel pan slider

Adjusts the pan for the selected channel.

7

SEND TO AUX box

Touch when selected to display the SEND TO AUX screen.
Displays the amount of signal from the selected channel that is sent to each AUX bus.
Send level, the selected channel's fader level, and the actual send level grouped with the 
DCA is displayed in the horizontal bar.
The information displayed here indicates whether the signal sent to the AUX bus is the 
pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is 
displayed in gray.

8

ASSIGN box

Displays the ASSIGN screen. (

page 58

)

9

Channel output level slider

Adjusts the fader level for the selected channel.

0

Channel output level meter

Displays the channel's output signal level.

DCA 1–DCA 8

ձ

ղ

ճ

յ ն

շ

ո

չ

պ

մ

ձ

յ

ղ

ճ

մ

Summary of Contents for TF1




























































































Reviews: