Yamaha TF1 Reference Manual Download

Page: 52 / 91

Configuration screens

Reference Manual

TF Series

- 52 -

FX screen (FX1/2, INS FX1–6)

Allows you to select an effect and edit its parameters.

Send button

Displayed for CH 1–40, ST IN 1 and ST IN 2.
Determines whether a signal is sent (on) or not sent (off) to the FX return channel.

EFFECT TYPE button

Displays the EFFECT TYPE screen (



page 53

), where you can select an effect type.

Effect type and name

Displays the type and name of the current effect.

R Safe (recall safe) indicator

Displays the recall safe status of the effects module.
Displays the RECALL SAFE screen. (



page 23

)

M safe (mute safe) button

Turns mute safe on and off for the effects module.

FX send level slider

Displayed for CH 1–40, ST IN 1 and ST IN 2.
Allows you to adjust the amount of signal that is sent to the effects module.

Pre button

Displayed for CH 1–40, ST IN 1 and ST IN 2.
Allows you to select whether the pre-fader or post-fader signal is processed by the effect
module.

: Before the fader

Off

: After the fader

Parameter selection buttons

Touch to display other parameters available for the current effect.

Parameter sliders

Allow you to adjust the parameters available for the current effect.

Sync button

Displayed for effects that have a tempo setting, such as delays. When this button is
turned on, the effect's tempo setting can be controlled with the [TAP] button found in
the SENDS ON FADER section of the top panel.

Bypass button

Allows you to bypass the effects module.

Effects output level meter

Displays the effects output level.

CUE button

Turns cue on and off for the effects module.

Summary of Contents for TF1




























































































Search results

Summary of Contents for TF1

Reviews:

Related manuals for TF1

Brands by name

Popular brands

Yamaha TF1, Reference Manual

Search results

Summary of Contents for TF1

Reviews:

Related manuals for TF1

Brands by name

Popular brands