background image

1

Pe

rfo

rm

in

g D

ev

ice

 M

ain

ten

an

ce

Utilizing Latest Functions  

(Revision Upgrade) 

You can utilize the latest functions by downloading 
from  our  website  the  latest  program  (firmware) 
to  manage  the  functions  of  this  product  (revision 
upgrade). 

Software License Agreement

To use the revision upgrading function, you should 
accept the following software licensing agreement.

1  Permission of use

The  present  Software  Licensing Agreement  is 
intended to allow Yamaha Corporation (hereinafter 
referred to as “Yamaha”) to permit you to use the 
firmware  (hereinafter  “this  program”)  for Yamaha 
ProjectPhone  program  after  having  accepted 
(hereinafter “this product”) You can download this 
the  terms  and  conditions  of  the  present  Software 
Licensing Agreement.
The  present  Software  Licensing Agreement  is 
applicable to the downloaded copy of this program 
as well as to its duplicates produced in accordance 
with the present Software Licensing Agreement.

  Inhibition of redistribution

You  are  permitted  to  download  this  program  only 
when  you  are  intended  to  upgrade  the  functions 
of this product. It is inhibited to upload or post this 

program in a website accessible by an unspecified 

number  of  the  general  public  unless  there  is  a 
permission from Yamaha.

  Production of duplicates

You  may  not  produce  duplicates  of  this  program 
unless when it is necessary for backing up purpose 
or for upgrading of more than one of this product.

  Inhibition of decompiling, reverse 

engineering or disassembling

You  may  not  decompile,  reverse-engineer, 
disassemble, alter, permit the use of, distribute or 
create any derivative works of this program 

  Limitation of liabilities

Under  any  situation  including  a  negligence  of  its 
own, Yamaha will not assume any liabilities on the 
damage  tothe  customers  caused  by  the  present 
Software Licensing Agreement.

6  Export control

You  shall  comply  with  all  applicable  export  laws 
and regulations of any relevant countries including 
but not limited to Japan and your country. You shall 
not,  directly  or  indirectly,  export  or  re-export  this 
program except in compliance with such laws and 
regulations.

  Compliance to laws and regulations

This  Software  Licensing Agreement  should  be 
compliant  to  the  laws  and  regulations  of  Japan 
and  your  country,  and  should  be  interpreted  in 
accordance with the laws of Japan.

Summary of Contents for PJP-MC24





























































































Reviews: