Yamaha NAVIGO Owner'S Manual Download Page 88

Page: 88 / 125

WARNING

● Be sure to store the disconnected battery with the pro

tective cap on it. Exposed contacts can cause short

circuits and lead to a fire or battery rupture.

Protective cap

(7) Load the wheelchair into the car.

Gently load the wheelchair by holding the frame portion with both

hands.

(8) Secure the wheelchair.

Secure the wheelchair to prevent it from moving or hitting any sur

rounding objects.

When loading:

• This product uses precision electronic parts. Do not apply sharp

impact.

• Load it upright whenever possible.

• If loading it on its side, place it so that the controller is at the top.

Secure the wheelchair, ensuring that the controller is not hitting

against any surrounding object.

Securing the Wheelchair

• Strap it down with a strap, etc., or place shock absorbing mate

rial under and around the wheelchair.

TIP

Cushions

Summary of Contents for NAVIGO






























































































































Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands

Yamaha NAVIGO, Owner'S Manual

Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands