95
11
WARNING
● Operating the wheelchair when the anti-tip device is removed or not in the correct position
may cause a rollover. Make sure you operate the wheelchair with the safety wheels facing
downwards.
● Only have the safety wheels facing upwards when going over bumps with the assistant op
-
erations and other such situations.
● Make sure you return the safety wheels to the correct position after going over the bump.
● A road surface with large depressions can cause a rollover, even if the safety wheels are
facing downwards. When going over bumps, also pay close attention to the condition of
the road surface.
● Even if the anti-tip device is in the correct position, the wheelchair could rollover due to
various factors, such as a bumpy road surface, holes, level differences, and slopes.
Carefully choose routes you use frequently to be sure they are not hazardous.
In case of NAVIGO 16″
(1) Placing the safety wheels in an upward-facing position
Press in the lock pin on the underside with your
finger.
Turn the anti-tip device 180° while the lock pin is
pressed in.
(2) Placing the safety wheels in a downward-facing position
Press in the lock pin on the top side with your finger.
Turn the anti-tip device 180° while the lock pin is
pressed in.
Lock pin
Lock pin
Safety wheel
Summary of Contents for NAVIGO
Page 28: ...1 22 1 6 Warning Label Location Diagram Power Unit and Controller NAVIGO 16 FRONT BACK ...
Page 29: ...1 23 NAVIGO 24 FRONT BACK ...
Page 30: ...1 24 Lithium Ion Battery Nickel Metal Hydride Battery Back side ...
Page 31: ...1 25 Charger for Lithium Ion and Nickel Metal Hydride Battery ESC3 ...