Yamaha NAVIGO Owner'S Manual Download Page 86

Page: 86 / 125

9.6. Charger (ESC3) Indicator Lamps

The charger (ESC3) for the lithium ion battery has a charge

lamp to indicate the battery and charging conditions accord-

ing to the lamp’s color and whether it is on or flashing.

The lamp indications are explained in the following table.

Charger lamp indication

Battery capacity

indicator lamps

Description

Lit green

Charge lamp (green)

Turn on

succes-

sively

Indicates normal charging.

The charge lamp will turn off after charging has completed.

Flashing green

(once per second)

Charge lamp (green)

Flashing
On

Indicates charge standby.

• When the temperature of the battery is not within the chargeable

range 32 to 104°F (0 to 40°C), the charger enters a standby state

and the charge lamp starts flashing in green.

• Once the battery temperature falls within the chargeable range

during standby, charging will start automatically and the charge

lamp (green) changes from a flashing to an “on” state. However, if

the charge standby condition continues for a long time, charging

will end. When this happens, the charge lamp flashes rapidly in

green.

Flashing green

(5 times per second)

Charge lamp (green)

Flashing
On

Indicates timeout of charge standby.

• The charger has remained in standby mode for a long time and

has stopped charging the battery. Re-locate the charger and try to

charge the battery again

Lit or flashing red

Charge lamp (red)

Off

The charger has detected a problem in the charger or the battery, and

is unable to charge. Stop charging by disconnecting the charger plug

and the power plug. Check the battery, charger, and cord connection

for any problem, and then try charging again.

If the charge lamp light comes on or flashes in red again, an equipment

failure may have occurred. Stop charging by disconnecting the char

ger plug and the power plug, and have the equipment inspected by a

dealer.

Charge lamp

Summary of Contents for NAVIGO






























































































































Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands

Yamaha NAVIGO, Owner'S Manual

Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands