Yamaha NAVIGO Owner'S Manual Download Page 53

Page: 53 / 125

(2) Practice in an actual location where you intend to use the wheelchair.

Sidewalk

• Be careful not to bump into pedestrians and obstruc-

tions.

• Adjust your operation to suit the road surface condi-

tions.

Basic Operations 2

Up and down a level difference

• Learn how to safely maneuver up and down small

curbs and know the limits.

• Stop your wheelchair before a curb, and then proceed

carefully.

Crosswalk

• Allow sufficient time to cross the road at a crosswalk.

• Be careful with the curb between the road and the

sidewalk.

Slope

• Get the feel of riding up and down a slope.
• Restart carefully on an uphill.

Automatic door

• Practice at the proper stopping position.

Check the condition of the road you frequently use on wheelchair on a daily basis.

Is there a large level difference, steep slope, or rough road?

Try to travel on a route that does not pass through such dangerous locations.

TIP

Summary of Contents for NAVIGO






























































































































Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands

Yamaha NAVIGO, Owner'S Manual

Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands