Yamaha NAVIGO Owner'S Manual Download Page 83

Page: 83 / 125



After charging has completed, unplug the char-

ger plug and the power plug, then securely

close the battery’s connector cover.

Charger plug

Connector cover

Power plug

NOTICE

● Do not pull on the power cord. This can cause the wires to break.

(3) Charging the battery attached to the wheelchair (on-vehicle charging)

Prepare for charging.

Remove any bags and luggage from the backrest, and anything else that can potentially tangle

the charge cable.

Park the wheelchair indoor on a level floor, and apply the parking brakes.

Turn off the power switch on the wheelchair.

As a safety measure, during on-vehicle

charging, the wheelchair will not power on even

if it is switched on.

Insert the power plug of the dedicated charger

(ESC3) into the residential power outlet.

Open the connector cover, and insert the char-

ger plug into the charge connector on the bat-

tery.

Residential power outlet

Connector cover

Charger plug

Power plug

Summary of Contents for NAVIGO






























































































































Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands

Yamaha NAVIGO, Owner'S Manual

Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands