Yamaha NAVIGO Owner'S Manual Download Page 75

Page: 75 / 125

Charger lamp indication

Battery capacity

indicator lamps

Description

Lit or flashing red

Charge lamp (green)

Off

The charger has detected a problem in the charger or the battery, and

is unable to charge. Stop charging by disconnecting the charger plug

and the power plug. Check the battery, charger, and cord connection

for any problem, and then try charging again.

If the charge lamp light comes on or flashes in red again, an equipment

failure may have occurred. Stop charging by disconnecting the char

ger plug and the power plug, and have the equipment inspected by a

dealer.

Charge lamp (green) is flashing

(once per second)

Charge lamp (green)

Flashing

Indicates charge standby.

• When the temperature of the battery is not within the chargeable

range 32 to 104°F (0 to 40°C), the charger enters a standby state

and the charge lamp (green) starts flashing.

• Once the battery temperature falls within the chargeable range

during standby, charging will start automatically and the charge

lamp (green) changes from a flashing to an “on” state. However, if

the charge standby condition continues for a long time, charging

will end, and the power for the charger will turn off.

Charge lamp (green) is flashing

(5 times per second)

Charge lamp (green)

Flashing

Indicates timeout of charge standby.

• The charger has remained in standby mode for a long time and

has stopped charging the battery. Re-locate the charger and try to

charge the battery again

Refresh lamp (orange) is flashing

Refresh lamp (orange)

Flashing
On

Refresh charging is being requested.

While the refresh lamp is flashing, press the refresh switch to perform a

refresh charge cycle.

If you do not press the refresh switch, a normal charging begins after 1

minute.

Refresh lamp (orange) is on

Refresh lamp (orange)

Turn off

succes-

sively

Indicates refresh charging.

The remaining electricity is being discharged as part of the refresh

charging process. When the discharge has completed, normal charging

will start.

Summary of Contents for NAVIGO






























































































































Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands

Yamaha NAVIGO, Owner'S Manual

Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands