Yamaha NAVIGO Owner'S Manual Download Page 59

Page: 59 / 125

6.3. After Assistant Operations are Finished

(1) Park the wheelchair on a flat location.

(2) Turn off the power switch.

(3) Apply the parking brakes.

(4) Set the left and right clutch levers in the power drive position.

(5) Have the user get off the wheelchair.

(6) Disconnect the battery from the wheelchair.

Store the battery with the protective cap on it.

Power
switch

WARNING

● After you are done traveling in assistant power driver mode, be sure to turn the power off.

If the power is on when the user get off the wheelchair, the body may hit against the

switches, causing it to start moving, and you or other people in your surrounding area may

get injured.

● Position the wheelchair in a level and stable location next to a bed or chair. If you park

the wheelchair on an incline, the user may lose balance and fall when trying to get off the

wheelchair.

● If the user gets off the wheelchair with the left and right clutch levers in the manual position

and with the parking brakes released, the wheelchair may move unexpectedly, causing the

user to fall off and be injured. When getting off the wheelchair, make sure that the left and

right clutch levers are in the power drive position and the parking brakes are applied.

WARNING

● Be sure to store the disconnected battery with the pro

tective cap on it. Exposed contacts can cause short

circuits and lead to a fire or battery rupture.

Protective cap

Summary of Contents for NAVIGO






























































































































Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands

Yamaha NAVIGO, Owner'S Manual

Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands