Yamaha NAVIGO Owner'S Manual Download Page 115

Page: 115 / 125

109

12.2. Daily Checks

Perform the following checks every day before operating the wheelchair. For details, refer to “3.1. Inspect-

ing the Wheelchair”.

Exterior

Visually check the components and ensure that they are not damaged.

Anti-tip device

Make that the anti-tip device is in the correct position and locked in

place.

Rear tires

Make sure that there is tire depth, there are no cracks, and there is

sufficient air pressure.

If the pressure is not enough, pump up to 450 kPa for NAVIGO 24″ or

345 kPa for NAVIGO 16″.

Parking brakes

Make sure that the parking brakes can stop the wheels from moving,

and that they are installed securely to the frame.

Wheels

Make sure that the wheels are not deformed and the spokes are not

broken.



Casters

Make sure that there is tire depth, and there are no cracks.

Make sure that the caster forks are not damaged.

Make that the nuts securing the tires are not loose.



Battery

Check the residual capacity.

If any problems are found, have the dealer repair the wheelchair.

12.3. End of NAVIGO Use Recycling

When the NAVIGO is at the end of its service life and must be disposed, contact your local government

office first for recycling and follow their instructions. Or contact your dealer to recycle your used NAVIGO

and its batteries.

Summary of Contents for NAVIGO






























































































































Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands

Yamaha NAVIGO, Owner'S Manual

Search results

Summary of Contents for NAVIGO

Reviews:

Related manuals for NAVIGO

Brands by name

Popular brands