3-17
ENGINE
Recommended antifreeze
High-quality ethylene glycol
antifreeze containing corrosion
inhibitors for aluminum engines
Mixing ratio
1:1 (antifreeze:water)
Quantity
Total amount
1.00 L
(0.88 Imp qt, 1.06 US qt)
Coolant reservoir capacity
0.25 L
(0.22 Imp qt, 0.26 US qt)
From minimum to maximum
level mark
0.15 L
(0.13 Imp qt, 0.16 US qt)
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
WARNING
•
If coolant splashes in your eyes, thor-
oughly wash them with water and consult
a doctor.
•
If coolant splashes on your clothes, quick-
ly wash it away with water and then with
soap and water.
•
If coolant is swallowed, induce vomiting
and get immediate medical attention.
CAUTION:
•
Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant, check
and if necessary, correct the antifreeze
concentration of the coolant.
•
Use only distilled water. However, if dis-
tilled water is not available, soft water
may be used.
•
If coolant comes into contact with painted
surfaces, immediately wash them with
water.
•
Do not mix different types of antifreeze.
11.Install:
• Radiator cap
12.Fill:
• Coolant reservoir (with the recommended
coolant to the maximum level mark “a”)
13.Install:
• Coolant reservoir cap
14.Start the engine, warm it up for several min-
utes, and then turn it off.
15.Check:
• Coolant level
Refer to “CHECKING THE COOLANT LEV-
EL” on page 3-14.
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
16.Install:
• Panel (right)
Refer to “FUEL TANK” on page 7-1.
a
b
Summary of Contents for MT-03
