manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 86

7-15

Exhaust system 

The exhaust system on the ATV is very hot
during and following operation. To prevent
burns, avoid touching the exhaust system.
Park the ATV in a place where pedestrians or
children are not likely to touch it. 

WARNING

POTENTIAL HAZARD 
Hot exhaust system. 
WHAT CAN HAPPEN 
Dry grass or brush or other combustible
material accumulated around the en-
gine area could catch fire. 
Someone touching the exhaust system
during or after operation could be
burned. 
HOW TO AVOID THE HAZARD 
Do not operate, idle, or park the ATV in
dry grass or other dry ground cover. 
Keep the engine area free of dry grass,
brush, or other combustible material. 

Do not touch the hot exhaust system. 
Do not park the ATV in a place where
others might be likely to touch it. 

EE.book  Page 15  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands