manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 35

4-13

NOTE:

_ 

●

When the switch is set to “LOCK”, the dif-
ferential gear lock indicator light will flash
until the differential gear is locked. 

●

When the indicator light is flashing, turn-
ing the handlebar back and forth will help
the differential gear lock to engage. 

●

Riding before the differential gear lock is
properly engaged (e.g., when the indica-
tor light is flashing) will cause the engine
speed to be limited until engagement is
complete. 

●

When the ATV is in 4WD-LOCK, the
maximum traveling speed is limited to
35 km/h (22 mph). However, if conditions
require full engine power to be available,
push and hold the override switch to dis-
able the 4WD-LOCK speed limiter. (See
pages 4-8–4-9 for a detailed explanation
of this switch.) 

_ 

EBU00062

Throttle lever

Once the engine is running, movement of the
throttle lever will increase the engine speed.
Regulate the speed of the machine by varying
the throttle position. Because the throttle is
spring-loaded, the machine will decelerate,
and the engine will return to an idle any time
the hand is removed from the throttle lever.

1. Throttle lever

EE.book  Page 13  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands