manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 168

8-56

4. Install a new headlight bulb holder as-

sembly by inserting it and turning it clock-
wise.

1. Do not touch the glass part of the bulb.

CAUTION:

_ 

Do not touch the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the luminos-
ity of the bulb, and the bulb life will be ad-
versely affected. Thoroughly clean off any
dirt and fingerprints on the headlight bulb
using a cloth moistened with alcohol or
thinner. 

_

WARNING

POTENTIAL HAZARD 
A headlight bulb is hot when it is on and
immediately after it is turned off. 
WHAT CAN HAPPEN 
You can be burned, or a fire could start
if the bulb touches something flamma-
ble. 
HOW TO AVOID THE HAZARD 
Wait for the bulb to cool before touching
or removing it.

EE.book  Page 56  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands