manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 112

7-41

●

If your ATV is traversing a sloping surface: 
Be sure to ride with your weight positioned
towards the uphill side of the ATV to main-
tain proper balance. If the ATV starts to tip,
steer down the hill (if there are no obstacles
in your way) to regain balance. If you dis-
cover that the ATV is going to tip over, dis-
mount on the uphill side. (See pages 7-32–
7-33.) 

●

If your ATV encounters shallow water: 
Ride slowly and carefully through slow
moving water, watching for obstacles. Be
sure to let water drain from the ATV and
CHECK YOUR BRAKES FOR PROPER
OPERATION when you come out of the
water. Do not continue to ride your ATV un-
til you have regained adequate braking
ability. (See pages 7-34–7-36.)

WARNING

_ 

Indicates a potential hazard that could
result in serious injury or death. 

EE.book  Page 41  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands