manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 159

8-47

EBU00356

Cable inspection and lubrication

Lubricate the inner cables and the cable ends.
If the cables do not operate smoothly, ask a
Yamaha dealer to replace them.

EBU12600

Lubricating the brake levers and brake 
pedal

Lubricate the pivoting parts.

NOTE:

_ 

To access the brake pedal pivot, remove pan-
el B. (See page 8-9 for panel removal and in-
stallation procedures.) 

_

WARNING

POTENTIAL HAZARD

Damaged control cables.

WHAT CAN HAPPEN

Corrosion can result when the outer
covering of control cables becomes
damaged. Cables can also become
frayed or kinked. Operation of controls
could be restricted, which could cause
an accident or injury.

HOW TO AVOID THE HAZARD

Inspect cables frequently. Replace dam-
aged cables.

Recommended lubricant:

Yamaha chain and cable lube or 
SAE 10W30 motor oil

Recommended lubricant: 

Lithium-soap-based grease 
(all-purpose grease) 

EE.book  Page 47  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands