manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 134

8-22

CAUTION:

_ 

Be sure no foreign material enters the dif-
ferential gear case. 

_

6. Install the differential gear oil filler bolt,

and then tighten it to the specified torque.

7. Check for oil leakage. If oil leakage is

found, check for the cause. 

EBU12560

Cooling system

1. Place the ATV on a level surface.
2. Check the coolant level in the coolant

reservoir when the engine is cold as the
coolant level will vary with engine tem-
perature.

NOTE:

_ 

The coolant should be between the minimum
and maximum level marks. 

_

1. Coolant reservoir cap
2. Maximum level mark

3. Minimum level mark

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

Oil quantity:

0.23 L (0.20 Imp qt, 0.24 US qt)

Tightening torque:

Differential gear oil filler bolt:

23 Nm (2.3 m·kgf, 17 ft·lbf)

EE.book  Page 22  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands